-
Hey there,
I am working on a design similar to yours and would love to know the wiring you used. Would it be possible to get a photo of your wiring or have you had time to make a diagram? Also, I …
-
TopicRankと比較
-
It's kind of annoying how porly supported rotation is. I'd also like to see and option to support fliping some components too. Here are a few major suspects:
- [ ] **Power and ground**
Aside from …
-
Hi, I'm creating this issue to track the problems that I'm facing when interfacing the iMac FP panels to an ATX motherboard. This may be a scenario that other people attempt.
Currently the imac_g3_…
-
This code was designed in response to [this issue](https://github.com/adafruit/Adafruit_CircuitPython_CircuitPlayground/issues/12).
The following is written in the context of the Circuit Playground…
-
This issue is to keep track of the issue reported here: https://github.com/SymbiFlow/symbiflow-arch-defs/issues/1776.
## Problem statement
The auto-generated designs, such as litex, present some…
-
Are you still working and available for this project? I have few questions about the spiral wired antenna in the transponder.
I only get wire with different diameters, has like an equation to adapt t…
-
HI, i like the idea off the led to indicate status,but to get my head around the wiring.
Using a ESP-01
I assume the statement means the following GPIO2>>>>>green led (-) leg>>>>(+)leg to 3.3v.
…
-
Hi!
Great work on circuit training.
I came across this issue while parsing the [Ariane RISC netlist.pb.txt file ](https://github.com/google-research/circuit_training/blob/c25b27b240468f307c3cace…
-
Hello,
Many thanks for sharing this great project.
I just start to use stm32cubeide, and trying out the source code.
But I continue to receive the following message when connected through serial …
nlpng updated
2 months ago