-
# Home Assistant Adaptive Lighting Issue Template
## Bug Reports
If you need help with using or configuring Adaptive Lighting, please [open a Q&A discussion thread here](https://github.com/basni…
-
When testing NonStop builds for 3.2.0-beta1, `quicapitest` (and sometimes `quic_tserver_test`) hangs waiting for initial input. This did not occur with 3.2.0-alpha2 but this may be transient.
Stopp…
-
Since different PRs now, a lot of people are complaining of random change of the flow from 100% to 10% during a print.
Below a description of the typical error observed:
I get all these echo: F0, …
-
Hi,
It seems that many of the new 2021 models Lay-Z spa come with a new heating/pumping unit.
I don't know what its internals look like, but it looks like this on the outside.
 is a methodology for reducing eye strain and general health by instituting a series of short (genera…
-
Dear Betaflight dev team,
I got the GPS issue with 4.1.1
It fixed position very fast, but after several minutes, it down to 4 or 5 sats and hold at that for long time, and GPS rescue N/A warning, …
-
52Pi sent me their [52Pi CM4 Router Board](https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/293). I'd like to see how it compares (especially with things like pps) against the DFRobot a…
-
I can't seem to get correct values from a DMX bus.
I'm using an ESP32.
I can put my Saleae logic analyzer on the rx pin and it decodes the DMX values fine. But, dmx.read() in the read example, n…