-
The GoCD currently operates four (4) high accuracy GNSS base-stations, which report observations in RINEX, Leica, and Trimble formats. These observations are useful for the post-processing of GNSS obs…
-
2 locations assign navdata->is_fixed, which one is ok?
-
When I try to use srctblbrows.exe to get the stream list from the cddis-caster.gsfc.nasa.gov:443 server I get a 'disconnected' in the status line.
Per https://cddis.nasa.gov/Data_and_Derived_Produc…
-
Hello,
I am having a persistent issue where I cannot establish a mock GPS location with my (brand new) Garmin Montana 700i. In fact, it seems I can only establish a GPS Bluetooth connection through…
-
Hey, been a while. Thought I'd try flashing a new custom ROM. Interestingly enough, a new patched ROM was just published.
So I've been through the hoops a couple times and I've decided to try this …
-
After a simple test, the GPS performance of the M10 chip has been greatly improved compared with the M8, but the oXs cannot be recognized. I have failed to configure this GPS many times. Can you add…
-
Hello,I am a student,I am sorry for that I want to use chinese to cleary express my question:
您好,目前我的研究利用到harsh urban 中的IMU数据,但是我观察到Harsh urban 中的数据集同样在sensor_msgs中存在IMU的数据,这部分数据和您提供的IMU数据是否一样?因为我的…
-
Hey @jamesshao8 I created gps file and the .txt with the frequency for your replayer with https://github.com/osqzss/gps-sdr-sim in Windows, following your instructions https://blog.csdn.net/shukebeta0…
eried updated
4 years ago
-
Is it possible to log not only the location solutions but the raw observables - pseudorange, doppler, adr? Thanks
-
Thank you for sharing your experiece. I have some modules like your system, and my system is:
GNSS receiver u blox ZEd-f9p
Novatel PwrPak7
STIM300
IMU xsens-mti670
camera realsense D435
Lidar VL…