-
Hi Nik, I'm having a problem with a T-Display-S3-Amoled (v1 I think) project I'm working on, and I wonder if you can help, given your knowledge of the rm67162. The project uses TFT_eSPI and your ver…
twj42 updated
1 month ago
-
We need the ability to recover from an SD being removed and reinserted. I would prefer this to be automatic.
There are three scenarios that make this necessary:
- Power down for low-power sleep
- C…
-
Ideas:
1) Show different color of Fan icon in the tile if it's connected (or grayscale the entire tile) (medium)
2) If the user tap on the Fan Speed Text in the tile change the mode (high):
if…
-
Lately my RTX 3090 has been having power issues. Temps are normal and sitting pretty low for a 3090. But for some reason it won't use the max power output it is rated for. MSI Overclock also has the p…
-
Does the kernel 4.11 and onwards have the default quirk to disable low power states for SM951/PM951?
Does this quirk disable ALL power savings or just some? I do have that HDD and never had any probe…
-
I am using Matek F405 WMN FC with Matek M10Q 5883 GPS. The barometric sensor is recognized when the GPS is not connected. Once the GPS is connected, the barometric sensor turns red.
-
We have a use case in Wi-Fi that uses low power mode (TWT) and it has specific windows for transmit, rest of the time the device is in low power state. We typically use Zperf as the main traffic gener…
-
the chips i need to flash are soldered onto their power supplies - as in most of the LED bulbs i can find around here.
i have built a wifi linked flashed using an esp8266 chip, provides a telnet se…
-
Hi,developers
I conducted two measurements of the same FPGA architecture at low temperatures with power supply voltages of 0.7V and 0.8V, the value of vth0 was also changed to 0.3 in the 22pm process…
-
Starting the SNMP driver it says:
Jun 10 11:50:40 pmhost3 upsdrvctl[15852]: No matching MIB found for sysOID '.1.3.6.1.4.1.318.1.3.2.7'!
Jun 10 11:50:40 pmhost3 upsdrvctl[15852]: Please report it…