-
Hello
When setting Z_SAFE_HOMING_X_POINT (negative value) & #define MIN_PROBE_EDGE (negative value) I get an error when compiling.
error is as follows
sketch\src\module/planner.h:271:84: er…
-
I'm trying to use pointcloud topic fusion method in the planner simulation.
However, I've found the critical issue when using pointcloud + odometry for SDF map fusion. Previously updated local map …
-
OTP1 support loading multiple graphs (routers) and this is part of the URLs. In most deployments only one router is used (the default router).
This make the code complicated; hence increase the…
-
We have switched from Classic Jerk to Junction Deviation as the default basis to calculate Planner:: moves. The example Configuration.h files have been updated to have an accurate Junction Deviati…
-
Hi there new to marlin and working with a MKS Gen 1.4 and been doing good on it, Got it all working and I noticed after testing the hotend and heatbed for stability for an hour, I looked at the LCD an…
-
This is a follow-up to a topic which already was here a long time ago, but I can't find it anymore. If someone remebers it and can find the issue, you might link it here.
During the research for st…
-
using the latest Marlin-bugfix-2.0.x
im having a hard time to figuer out how UBL bed level works
dont matter what settings i use im always getting same results
my machine has a work area of 200 x…
vMeph updated
4 years ago
-
I have a similar issue. The first two images show output for a search and replace that failed completely. The errors reported are rather cryptic. The overall count of successes vs fails seems totally …
-
Hello,
i have Problem with acceleration (Dual-X-Carriage with 2 independend stepper motors and stepsticks.)
if i change the acceleration values extreme, like from 4500 to 200 i can see that the acce…
-
I am using Marlin v1.1.5
https://github.com/MarlinFirmware/Marlin/releases/tag/1.1.5
Dual X carriage Cartesian printer with RUMBA board
Trying to change / adjust the tool1 offset
#define HOTEND_OF…