-
Hello!
I received an old Geonaute Count 14+ device and I wanted to transfer the data on Linux, instead of running a windows box just for this.
lsusb shows me the following:
Bus 002 Device…
-
Hello, it seems your image does not include the firmware file for the VisionFive kit that comes with wifi. It shows the following in dmesg:
```
[Sat Mar 25 15:45:31 2023] usb 1-1.2: new high-speed U…
-
The Unified Host .jar has a few things wrong with it:
* It does not check that the response received was for the correct command. E.g. if it issues a ERASE_FLASH (2) but receives a READ_BOOT_INFO (…
-
@honorpeter Would you please upload your kernel config file as I mentioned before, I think there might be some config about module sig that has not been enable.
_Originally posted by @eleICoto in h…
-
Hey, I'm trying to output the data that is sent out the 32u4's USB to that, but also out to a ESP8266 so I can send it to a web server, I was wondering if you knew what changes I could make to accompl…
-
リスト:
- 今使っているGPSモジュール
- 製品: [Micro M8N GPS](http://www.holybro.com/product/micro-m8n-gps/)
- GPSチップ: [ublox M8N](https://www.u-blox.com/en/product/neo-m8-series?lang=ja#tab-product-selection…
-
Hi, a friend has this Pixel Kit (non-kickstarter edition), and tried to put micropython on it. The device appears to load with just the battery connected (~3.7v), it displays some patterns then has 3…
tyeth updated
5 months ago
-
Hi, I would like some advice. I have a solar inverter: Effecta AX-P1
It has a USB2.0 type B data port that can be connected directly to a USB PC and I can monitor the data using the WachPower program…
-
Hola,
Does DeviceScript support M5Stack?
https://www.m5stack.com/
If yes then I’ll buy one of their devices and continue experimenting with your VS Code plugin.
-
Hi, i've successfully built and used the "SimulateCDC" example, but it has a few issues:
- It forces you to connect two hardware uarts together externally which is a bit silly (if possible i'd like…