-
I've been trying to use this plugin to create my gridfinity system. But I don't want to use super glue, and wanted to press fit magnets instead.
Using standard 6x2mm magnets, at first I tried 6.05x…
-
_From @oparoz on July 21, 2016 13:6_
## Feature request
**User type**: Any
**User level**: Beginners
### Description
STL files are used to exchange CAD designs, like the ones used by 3D printers.…
-
Slicer doesn't obey layer settings when printer Z full step/mm is used.
**Steps to reproduce the behavior:**
1. set printer's Z full step/mm to 25
2. set extruder's limits min to 0.16 and max 0.2…
-
So sorry to contact here but couldn't find anywhere else to pose a few questions :
Intro: I can solder, math, and learn software very quickly! I have a long history with flight sims and am buildin…
-
I use the tmc2660 stepper driver on my 3D printer. I use the TM2626Stepper library. When I start my 3-D printer, it is warming up because the motors come to a standstill and how do I stop it at the …
-
I just printed the stl for the Top of the case, the cavity for the PCB is 1mm to short in the x direction, and very tight in the y direction.
I compared the stls for top and bottom and are both diffe…
-
[Resin.io](https://resin.io/) provides a standard containerisation platform for embedded devices.
One of the biggest problems with installing + distributing opengb is installation and upgrades for va…
-
I would like to use this firmware for my custom 3D printer, however I was looking at using H-bridge motor drivers instead of the traditional direction/step motor drivers to drive bipolar stepper motor…
ghost updated
9 years ago
-
### Version 2.3.0+
_Version of PrusaSlicer used goes here_
_Use `About->About PrusaSlicer` for release versions_
_For -dev versions, use `git describe --tag` or get the hash value for the version…
-
In working with Daniel logging a purchase, some points of confusion:
- Didn't know which project to pick, 3D Printer or Digital Fab. It is clear if you look at the descriptions of the projects on the…