-
While attempting to get my grbl build to work with a custom built setup, i kept having trouble with startup and serial. It seems the issue was pin 12 being used.
Esp32 seems to have reserved this …
-
How are you guys, all right?
I'm in a dilemma for setting up the sensorless homing with the TMC2130 drivers, with Ramps 1.4 and Arduino Mega. I bought these from china already in the SPI-enabled ve…
-
Ver que opciones hay para drivers de motores CC. buscar algo que tenga baja resistencia on y alta eficiencia
idealmente que integren mosfets con RDSon
-
Which firmware file(s) are recommended for stock ender 5 plus ?
http://insanityautomation.com/Firmware/Creality/
I want to use bilenear bed leveling (if recommended)
is the stock Ender5 plus "dua…
-
Se debe elegir y comprar un driver para el motor paso a paso.
Se tiene en mente comprar modulos armados del fabricante TRINAMICS ya que poseen los denominados silent step stick que reducen muuucho …
-
Hello!
I am trying to change the filament using the M600 command without an LCD screen and an encoder. The way I want to do it, is calling other M commands when the printer asks for input.
I hav…
-
**Describe the bug**
Always when the motors are powerd with this firmware they are screaming relativly loud to hold its position and while moving. As soon as I stop the motors the sound will disa…
-
Hi, I am new to CNC and GRBL. Wondering if Limit Switches can be connected to the stock controller card? if yes, does anyone have wiring and GRBL programming instructions? Using GRBL v1.1f
The…
-
Stealthchop does not seem to come on. Installed TMC2130 on KFB2.0 board
selected TMC2130 for all 4 drivers (X/Y/Z/E0)
in configuration_adv.h have
```cpp
#define STEALTHCHOP_XY
#define ST…
-
Hello togehter,
**tl;dr**
I had problems to get the TMC2130 working.
When the Printer is moving in Example the X-Axis from left to right - 0mm to 10mm - than every Step back to 0 cause a shift to…