-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Probe temperature compensation has effect in exactly one place: in G29 for `AUTO_BED_LE…
-
When I try to compile Marlin on Raspberry (with Arduino 1.0.5) I get this error:
```
CC /usr/share/arduino/hardware/arduino/cores/arduino/wiring.c
CC /usr/share/arduino/hardware/arduino/cores/a…
-
i build a new prusa i2 with a capacitiv sensor for auto bed leveling, the sensing itself works fine. I couldnt test the createt Matrix if its correct, but if i start to print the auto bed leveling wor…
ghost updated
2 years ago
-
Hello, I'm using the Marlin v1.0.2 with auto bed leveling. The command G29 and the auto bed leveling process have no problem, however when I'm printing a rectangular calibration cube, the vertical 'wa…
-
Hi folks,
I'm very new to GitHub and this is my first opened issue, so please be kind ;-)
Using a Kossel Mini for about 1.5 years I tried switching to the latest Marlin Development version (last com…
-
Running the auto-bed leveling only moves the Z-stepper when delta geometry is enabled, rather than moving all 3 steppers to move the probe down
-
I test current versions of Marlin 45cfadc
G29 command not working normal. I got more than one measure per point
For 3x3 points field counts of measures is:
```
0 0 0
1 1 1
2 2 2
```
For 4x4 points f…
-
I would like to ask whether or not this could be a good idea or not, typically with abl alone, especially on my machine, the left side were higher compared to the right side. But physically the nozzle…
-
Hi guys,
Yesterday I updated Marlin to the latest version.
My printer is a Delta mini and it has a proximity sensor.
When I'm running G29, the extruder is going down until it heat the aluminu…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
When enable the CHAMBER_FAN without enable the AUTO_FAN it gives a compilation error CHAMBER_…