-
i use basler acA2440-20gc and usb camera , i setup branch ros2 galactic in docker.when i run ros2 cmd camera is working but some config is not working well.
1.when i set basler acA2440-20gc image_enc…
-
Hello,
We are using the Basler acA2040-55um camera and we are experiencing delay of ~1s during frame acquisition using PyPylon, on Ubuntu 16.04, running this script https://github.com/basler/pypylon…
-
**Describe the error**
CUDA_SDK_ROOT_DIR was not found
BUILD_GPU BUILD_CUDA and WITH_CUDA are set true
with MS 2022 the log i get is too long doesn't fit here
With MSVS2019 the log is …
-
I am using basler 1920-40uc. The code works fine while using in a single-threaded process. But due to the nature of the application, I have to make a process that repeatedly calls camera api and put t…
-
I am not publishing images, just using the GrabImages.action interface. I have noticed an off by one error where the frame is actually the previous one I would have expected to capture. Anyone else ru…
-
Dear guanying,
In this repository,you mentioned you used 3 lens ,1 Basler camera and 1 usb 3.0 cable,and i also want to buy an industry camera to capture data,are there any other devices that i…
-
-
With regards to the new iCub Head (UKIT009), we're required to evaluate the following configuration:
- WiFi enabled on COM-EXP.
- WiFi enabled on Xavier NX (there's a new antenna with a 90-deg connect…
-
**Host system details**
]$ rpm-ostree status
State: idle
Deployments:
● testremote:fedora/rawhide/x86_64/silverblue
Version: 38 (2022-11-22T23:02:08Z)
Comm…
-
Hi,
I am using a Nvidia Xavier NX device with JetPack 4.6, L4T 32.6.1 OS flashed on an SSD, so it is getting booted from this external storage. I connect an USB Basler camera to this device.
I a…