-
I was wondering if there is anyway to auto home the machine on start up (when the serial connection has established)? I tried putting $H in start string but it didn't work.
-
### Version
2.0.13
### Hardware / Firmware
GRBL 1.1
### What happened
If the machine is setup for inches and is running a file or a macro to move the tool and the stop button is hit the machine s…
-
Please, could you post the source code?
Tanks
-
### Version
2.0.12
### Hardware / Firmware
GRBL 1.1
### What happened
Hello! I am using UGS on my CNC router. The hardware is a development of my property based on X-Controller. I have had no pro…
-
Hi Thomas, I´ve been cutting for some time with great result and your firmware has been working like a charm. Thanks! As I updated my setup with a new control-box I decided to implement limit switches…
-
### Controller Board
self-made
### Machine Description
3-axis milling machine
### Input Circuits
_No response_
### Configuration file
```yaml
name: "ESP32 Dev Controller V4"
board: "ESP32 Dev …
-
See enclosed picture; GRBL setting ID 33 is in my case the triggervalue for the G-shock.
However, in other systems, this can be a different value, thats why it is uncommented by default.
It would …
-
Hello i Buy a dlc32 v2.1 for my Laser Graver with a ts35 Tft. And i find no Firmware. Can i use the Firmware from the 2.0 Version?
-
I have some issues with the driver enable signal, currently I have the Blackpill used to test some functionalities but I am planning on implementing a controller with the bare STM32F411 IC
When I …
-
Not really an issue, more a call for help.
I don't normally get stuck on things like this, I'm quite comfortable with designing PCB's and writing my own software etc, but for some reason I cannot f…