-
This happens to us from time to time using a SICK TIM571-2050101 with the `sick_tim551_2050001` node:
```
[ERROR] [/base_laser] [1489864434.459468694]: sendSOPASCommand: failed attempt to read from …
-
### Description of Issue/Question
One of my customers reported Jsnapy issue being the test reported 2x failures but there are no faults actually captured in the results.
Example output:
*****…
-
Reproductible with
```
$ cat c.rb
class C
send :each do
def foo
end
end
end
$ laser -d c.rb
{:fix=>false, :display=>true, :"report-fixed"=>false, :"line-length"=>nil, :only=>nil, :s…
-
### Wiki Search Terms
Edit yaml file with website
### Controller Board
DLC MKS 32 V2.1
### Machine Description
Laser corexy Neje 30w
### Input Circuits
_No response_
### Configuration file
``…
-
In the original game, the laser piece can also change orientation, facing the opposite axis. this is considered as one move. Can you please add that also as an update
-
This used to work before the changes ( which I requested) to support GRBL's adaptive laser power mode.
Now, if you want to turn the laser on with the "Spindle" button in the "control" section, e.g. t…
-
Hardware:
Arduino UNO+Arduino CNC sheild
Spindle Enable pin to D11
Software:
Grbl v1.1
bCNC 0.9.14
Start bCNC, set Spindle or Laser, Load NC file, Switch Spindle,Start operation,
Terminal feedb…
-
When settings the origin to another point XY on the bed, the position is not stored when rebooting the machine. Thats annoying in case the machine firmware chrashes in the meantime due to things like …
-
The weapons system requires a small rewrite to be as reliable, modular, and easy to use as possible moving forward.
This won't neccessairly be much of a _rework_, as the system only consists of bare …
-
Hi:
I made some PICMI files in the past week and I noticed the following things about the PICMI specifications, I am wondering if these can be implemented.
(1) for the laser make it possible t…