-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Because not to use LEDC or I2S PDM to generate a precise signal reference instead of low (8 bit) resolution internal DAC ?
Frequency | Bit depth | Available steps
Max 1220Hz 16…
-
Thanks for this repo.. the code and schematics work great for me. My prototype is working great however I have a question.. is it possible to add another DHT temperature probe? My AV cabinets have two…
-
**Situation:**
Having problem with TFT-uploading, where unit just appearantly reboots, with no other changes made.
I've troubleshooted i bit, trying both local and external tft-urls, but with no l…
-
### The problem
Enabling LD2420 on ESP8266 triggers a boot loop
### Which version of ESPHome has the issue?
2023.11.0
### What type of installation are you using?
pip
### Which version of Home A…
-
Yesterday I tackled this installation after having the panel sat in a drae for months.
The panel has been flashed via ESPhome and is online. It is auto-detected in Home Assistant and has 31 entitie…
-
Hi, today I got back to a project I wanted to create with this project so I started working on my 4 panel (each 64x64) chain and everything was going well all day. The repo was several months old, bt…
-
### The problem
I have a standard toggle (not momentary) switch at the top of my basement stairs with a Shelly 1PM installed. I would like to use this switch to switch the relay normally when swit…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
**arduinoIDE version**
ArduinoIDE v2.0.3
**espressif/arduino-esp32 version**
2.0.7
**esp32 board**
ESP32C3 DEV Module
**Homespan version**
homespan 1.7.1
**Build Error Message …