-
Hi,
I am using Dev. Board(Mti-670).
I attached the KIT on the top of my car and run IMU node. ("roslaunch xsens_mti_driver display.launch") in ROS.
In initial time, the orientation of device almos…
-
I do now own a LG G Watch R and tested c:geo wear on it. I am however not sure about the exact cause of the problem, so I try to descibe my experience:
- Basically the compass if alway off by 180°. I …
-
Hello parquerrr,
I hope this message finds you well. I came across your BDIOHID program, which handles converting old displays to the HID protocol. I believe your expertise could be of great he…
-
I use Shelly 1 with garage door mode for my 24VDC garage door.
Shelly is powered by the 24VDC from the motor unit directly.
I added on magnetic contact to detect when door is closed.
Now I want to …
-
### Description of the new feature / enhancement
Preface:
The mouse is the most important tool we have for interacting with graphical user interfaces, which are the majority of all computer interact…
-
Hi. I am trying to use a hall sensor module with sim7080g.
The documentation is not very clear on connections for i2c device, according to pinout on website, I have SDA on pin 13 and SDL on pin 21.…
-
Hello there, I have a problem with **self - test** values that show more than 40% difference from the factory values. In other examples, I saw that output should be as close to 0 as possible. Could so…
-
Hi Kris,
I use your program in this repository (MPU9250_BMP280_BasicAHRS_nRF52.ino). I output the quaternion after the sensor fusion. After putting it on flat surface for calibration of gyro and ac…
-
Dear Kriswiner,
Do you have any example with ESP32 + MPU9250 without MS5637 ?
My mission is do a angle level where I need to get ate least roll and pitch values, from one machine, save, and aft…
-
# Highlight
* Deep Learning Attitude Sensor (DLAS)
* OrigamiSat-1
* NEC Nano Bridge FPGA, NBFPGA
* 軽量太陽電池パドル機構 TMSAP
* ALE 1 (Astro Live Experiences 1)
* Aoba Velox-IV
* Hodoyoshi 2
## Bas…