-
related to
https://github.com/adafruit/Adafruit_CircuitPython_SD/issues/36
I know the "on-board" SDcard is not support on the feather STM32F405.
I tried attaching an Adalloger Featherwing using s…
-
Hi, as discussed in emails, it seems that the Pi running the RF24Gateway master node (0) can't route packets destined to be delivered via other nodes if it has received them from outside the Pi.
A …
-
Hi,
is it possible to decode RTTY directly? I have a module with sx1276, esp32 and oled display. I would like to receive and decode itty directly on board and show messages on display. Can you explai…
-
Hi
I have wired NRF24L01 module as follow
```
ATTiny84-|- RF24
PA6-------|- MISO
PA5-------|- MOSI
PA4-------|- SCK
PA3-------|- CSN
PA2-------|- CE
```
and staring library like this
…
-
The Crazyflie radio supports 32 bytes packets however this line limits the max packet size to 31: https://github.com/bitcraze/crazyflie-firmware/blob/crazyflie2/modules/interface/crtp.h#L33
When the …
-
Hi!
Thanks for making this library.
I have a question, I don't seem to be able to get this library to work with the following setup:
### Hardware:
- STM32F103C8 (Black Pill)
- NRF24L01+PA+RNA (…
-
**Is your feature request related to a problem? Please describe.**
I am sending some simple test packets from an Arduino Uno, and receiving them on an Arduino MKR 1010. I have been struggling for a …
-
Hi,
I have a teensy that i want to send multiple values to the RPi. However,...
The example sketches works most of the time and sometimes stops working, giving an error on the RPi:
`pi@raspber…
-
Hello. I have a simple question. Is it possible to use the rf24-network library with the esp32 module. I have searched all over and have not got help. Please help me
-
## Complex = overwhelming
Most people getting started with the nRF24L01 just need it to send data from 1 endpoint to another. The most basic `GettingStarted.ino` example does it both ways despite wha…