-
### Describe the bug
The connection with the printer is lost after a few hours, for it to work again the "reload" bambu lab operation must be performed in integration entries in Home Assistant (dev…
-
### Describe the bug
When it finishes scanning the first layer and starts printing, the chamber fan is always set to maximum speed 100%.... also after a while Home Assistant loses connection with the…
-
**Environment:**
- OS: Android 13 with latest update
- GPU and driver version: Samsung S23 ultra using Adreno gpu.
- SDK or header version if building from repo: android-binaries-sdk-1.3.261.1
…
-
**Environment:**
- OS: Android
- GPU: Adreno 650
- SDK: Validation Layer [1.3.261.1](https://github.com/KhronosGroup/Vulkan-ValidationLayers/releases/tag/sdk-1.3.261.1)
**Describe the Issue**…
-
Debugging with an MCU Link and an STM32H7 target, probe-rs yields frustratingly nearly-correct data. For example, in Hubris, `TICKS` is expected to increment 1000 times per second:
```console
$ h…
-
The Memory Controller must be able to communicate with the Advanced High-Performance Bus through a subordinate so that all parts of the processor that need to can access memory. The interface between …
-
您好，想问一下，看目前的香山项目，都是使用TL-test来验证TileLink在处理核内核间数据一致性功能是否有bug，看以前的报告中提到，TL-test不仅仅能用于系统级（针对L2的验证）、模块级（针对L2-L3的验证），还能用于SoC级别的验证，看目前南湖代码，好像是只有模块级和系统级的TL-test验证引用，请问在那里能看到针对SoC级别上TL-test对TileLink的验证应用？
此外…
-
hi,
i saw this repository in my perusal of sources that support the GRX350/550 processors.
does this kernel work for the dual core intel interaptiv mips devices?
if so, i'm very intrigued and…
-
in 4251
```
[23:48:57] [Client thread/ERROR] [FML]: SimpleChannelHandlerWrapper exception
java.lang.NullPointerException
at cpw.mods.fml.common.network.FMLOutboundHandler$OutboundTarget$7.selec…
-
`app.h` file from examples defines `CFG_HW_RESET_BY_FW` as follows:
```c
/**
* When set, this resets some hw resources to set the device in the same state than the power up
* The FW resets onl…