-
Hello. I have a new design that mounts the Z-axis endstop on a sled that can be docked on the right of the X-axis. I have modified Marlin to support this new feature and while it works, I occasionally…
-
First of all, Marlin version is 1.1.3
The thing is that G28 command homes to center correctly and without a problem. But when it comes to G29 command, it does not work for me. The problem is that G29…
-
### Bug Description
When using 4 Point Level, leveling mesh is applied if available resulting in ever growing Auto Leveling mesh values if used sequentially.
### Steps to Reproduce
1. Level y…
-
Hi, thanks for a really helpful plug-in.
Printer Ancubic i3 mega s, BL-Touch , Cura 4.8.0, Octoprint
I can adjust the distance nozzle to bed by applying e.g Z-offset -0.1. It works fine as expected…
-
I recently downloaded the latest RC 1.1.0-RC6 and attempted to take another stab at getting be(d) leveling working. I looked at the other defects and did not find a close enough match to my issue, alt…
-
Hi,
I've found out an issue while setting up Z probing in 3-points mode:
Marlin_main.cpp: In function 'void gcode_G29()':
Marlin_main.cpp:2844: error: invalid conversion from 'int' to 'ProbeAction'
M…
-
I have the Z endstop mounted on the print head but if the head is at the home position X0 Y0 the endstop cannot hit the bed.
Is there an option to use mesh bed leveling instead of auto bed leveling wi…
-
If the X carriage is in the middle, and I home it and then try homing X again nothing happens, It sounds like the printer wants to move it out and then back in like it is supposed to but It can't. I a…
-
I came across a cmos laser sensor from a scrapped industrial machine with a 0-4v analog output for 20-45mm range. 2um repeatability, .1% linearity that operates at 10-30vdc. I figure this is a perfect…
-
Hi, I'm using Marlin 1.1.0 RC8, and a RAMPS 1.4. Each AUTO_BED_LEVELING on marlin ignores points or boundaries set by using constants:
```
#define LEFT_PROBE_BED_POSITION 45
#define RIGHT_PRO…