-
When Mavlink protocol is used between Ardupilot and Crossfire TX, 'FM' (flight mode) don't show in sensors.
For this reason script doesn't detect CRSF and not work properly.
Solution:
change in …
-
Hi,
in the PR of 1.4.0 there is no selection for Crossfire or ELRS with the CRSF protocol. Is a new LUA script needed for this (like for the multimodules)?
It is possible to select the TwinLite …
-
FC Mamba F722 APP MK4
RC Elrs
VTX DJI AU
## Current Behavior
When activating vtx switch using User1 mode the RC link loss
## Steps to Reproduce
1. Connect the radio to FC
2. Switch on …
-
"Model-match" works, but is based on the model number (according to the order of the selected model). But in the model settings menu, there is a "Receiver Number", designed specifically to distinguish…
-
**## Current Behavior**
The Succex-D F7 Twing though same resources the gyro doesnt work if used on this flight controller.
**## Desired Behavior**
Everything to work. I have GPS with Compass, B…
-
Hi
Thanks for developing this tracker & the support you provide. I read your RC group thread and still a little bit confused most probably due to my lack on knowledge in this area!
If I'm to…
-
I am trying to build a bi-copter using omnibus f4 pro FC with inav configurator.
Since Inav don't have direct support for bi-copter I found some info on the [Issue #6013](https://github.com/iNavFlig…
-
While playing an FPV simulator, the USB cable can be very annoying. There are commercial solutions for this problem, like the [FrSky XSR-SIM Usb Dongle](https://oscarliang.com/frsky-xsr-sim-dongle/). …
-
## Current Behavior
I'm experiencing receiver hangs on R9mm both with R9M and HappyModel TX modules and on multiple receivers.
Symptoms:
Hang is pretty random, usually soon after powering up the…
-
## Bug report
The uBlox GPS reciver is not detected, when one of the usart port is set to be used as rc input for CRSF compatible (not fully compatible) reciver.
The setup is like following
SER…