-
-
We have proposed switching the real-time clock to match that used on the MEGA65 R3 PCB. However, this is not necessary, and to avoid (further) unnecessary changes to the PCB, we will leave it as it i…
-
**Describe the bug**
The mega65 hardware's serial monitor had a change in its serial protocol of late. I updated m65dbg to accomodate for this and it now works with hardware once more, but no longer …
-
**Description**
libghdl is generating unnecessary (for synthesis) midffs when code is split across multiple `if rising_edge(clock) then` blocks.
**Expected behaviour**
After https://github.com/LA…
-
The pet start address is $0400 and code set to start at $410.
![20210127_110257](https://user-images.githubusercontent.com/710401/105982686-869da400-608f-11eb-9e9e-8c1e4639a5f9.jpg)
There is som…
-
Probably something exists already like this? What I mean: a hypervisor DOS call, to read and write SD blocks, with all the works done, ie converting block level address to byte offset if not SDHC, doi…
-
**Describe the bug**
When I am in 64 mode and enter
POKE 53270,PEEK(53270) OR 16
everything is perfekt and I see the result: Switching to multicolor.
When I do the same in 65 Mode, no real c…
-
If an HDMI interrupt happens while initialising the HDMI chip, it will only cause the HDMI configuration to continue, instead of starting over from the beginning. However, the interrupt may indicate …
-
difficulty in knowing how to add a component to the design
using the ISEv14.7 as a glorified text-editor, I have changed iomapper to include a new-component that I built myself. After saving the pr…
-
Danke. Sehr interessant.
Warum man >2000 Zeilen C Code schreiben kann, aber keine 20 Zeilen readme.txt entzieht sich allerdings meinem Verständnis :-(
Das am Anfang des C Sourcecodes vieles steht is…