-
GOSI9 uses a quadratic bottom friction with a constant drag coefficient $C_D = 0.001$. However, according to the "law-of-the-wall", in the logarithmic bottom boundary layer (BBL) $C_D$ shoud depend o…
-
Currently it is annoying to use the unsafe `bits()` function when writing to tasks or clearing events.
I think the best way to approach this is to patch the SVD for any field with the name `task_` …
-
### Reproduction steps
We are doing the Matter certification test (TC-CNET-4.21) using TH Fall2023 image
We have 2 raspberry-pi, one for controller (chip-tool), another for ble-thread device and thr…
-
Hello community! 👋
We're reaching out to gather input and ideas for the future development of this repository. Your feedback is crucial in shaping the project and ensuring that it meets the needs o…
-
I wrote a python script that can be used to decipher OSEMBE codes of technologies and fuels.
You can access it here: [Code Decipherer](https://github.com/Timon-R/Code_Decipherer)
-
During #HackIllinois2017 @jacobrosenthal observed many issues with Windows and Zadig.
Need to explore adding a option to upload using the mbed disk using a batch file (windows) and shell script (Li…
-
I am interested in improving the atmel sam0 drivers so they provide better ability to adjust the clock. The challenge with this set of chips (I have worked on the samd21 and the samd51) is that you h…
-
Hi,
I am not seeing any blue light when try to use it to active my google account 2 step authentication. I've done compiling the firmware and is loaded in to the device successfully. But it doesn't…
-
-
Hi,
Related to #65 and the fix #92, BLE.end() still draw around ~0.5 mA on NANO 33 BLE Sense.
@facchinm mentioned that the CordioHCIHook doesn't shut down the radio (https://github.com/arduino-…
oRMMo updated
10 months ago