-
```
I've lots of ESC's lying around whilst I was building my octo (which turned
hexa). Have been flying happily with SimonK firmware for a while (never used
bell-motors)
Steps followed
1a.Upload la…
-
How about a key, say `zi`, that when pressed shows a dialog box with
- the page address in a focused entry box,
- a button `add to blacklist` and a button`cancel`
This would be more convenient than, …
-
```
ARducopter Ver. 2.0.47 hexa plus mode.
but back motor(port2) ESC doesnot initialized.
At first time I thought my Turnegy plush ESC had problem. I changed it. It
occured same problem just beep sun…
-
```
Iam using turnigy plush 25amp speed controller with turnigy 1100 kva motors,
and a hobby king HK-7 tr AND rx system 7ch mode 1
When connect any motors to the 0th pin of the APM, it starts beepin…
-
```
Iam using turnigy plush 25amp speed controller with turnigy 1100 kva motors,
and a hobby king HK-7 tr AND rx system 7ch mode 1
When connect any motors to the 0th pin of the APM, it starts beepin…
-
```
Iam using turnigy plush 25amp speed controller with turnigy 1100 kva motors,
and a hobby king HK-7 tr AND rx system 7ch mode 1
When connect any motors to the 0th pin of the APM, it starts beepin…
-
```
ARducopter Ver. 2.0.47 hexa plus mode.
but back motor(port2) ESC doesnot initialized.
At first time I thought my Turnegy plush ESC had problem. I changed it. It
occured same problem just beep sun…
-
```
Iam using turnigy plush 25amp speed controller with turnigy 1100 kva motors,
and a hobby king HK-7 tr AND rx system 7ch mode 1
When connect any motors to the 0th pin of the APM, it starts beepin…
-
```
Iam using turnigy plush 25amp speed controller with turnigy 1100 kva motors,
and a hobby king HK-7 tr AND rx system 7ch mode 1
When connect any motors to the 0th pin of the APM, it starts beepin…
-
```
Iam using turnigy plush 25amp speed controller with turnigy 1100 kva motors,
and a hobby king HK-7 tr AND rx system 7ch mode 1
When connect any motors to the 0th pin of the APM, it starts beepin…