zERoCooL6381 arducopter issues

zERoCooL6381 / arducopter

Automatically exported from code.google.com/p/arducopter

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Serial 3/4 parameters missing

#605 GoogleCodeExporter opened 8 years ago
0
Tricopter rudder/yaw servo trim, wrong servo trim number?

#604 GoogleCodeExporter opened 8 years ago
0
Install Firmware" issue in Mission Planner

#603 GoogleCodeExporter opened 8 years ago
0
ESC claibration problem

#602 GoogleCodeExporter opened 8 years ago
1
CH6-Option wrong numeric calculation to WPNAV_SPEED

#601 GoogleCodeExporter opened 8 years ago
0
Navigatio Waypoints, wrong parameter names in Mission Planner tuning section

#600 GoogleCodeExporter opened 8 years ago
0
hexacopter control change by 45 degres in air

#599 GoogleCodeExporter opened 8 years ago
0
Serial Port Error by bluetooth

#598 GoogleCodeExporter opened 8 years ago
0
''No heartbeat packets received''

#597 GoogleCodeExporter opened 8 years ago
0
Motors / ESC not functioning properly

#596 GoogleCodeExporter opened 8 years ago
1
Tricopter: rear boom bounces as throttle increases. When airborne one inch, goes into flat spin.

#595 GoogleCodeExporter opened 8 years ago
1
Do Not Add Issues Here!

#594 GoogleCodeExporter opened 8 years ago
2
Request NEW feature - Follow me (camera gimbal only)

#593 GoogleCodeExporter closed 8 years ago
1
Custom V Pitch Causes Yaw ... Need to change default numbers

#592 GoogleCodeExporter closed 8 years ago
2
[deleted issue]

#591 GoogleCodeExporter closed 8 years ago
0
[deleted issue]

#590 GoogleCodeExporter closed 8 years ago
0
[deleted issue]

#589 GoogleCodeExporter closed 8 years ago
0
Bluetooth instead of XBee

#588 GoogleCodeExporter closed 8 years ago
3
Out of date links on Get It Wiki

#587 GoogleCodeExporter closed 8 years ago
1
Logheader for built-in logs APM2.5 in MP 1.2.52 mav 1.0 not correct for CTUN.

#586 GoogleCodeExporter closed 8 years ago
1
Relay output does not work with APM2.5

#585 GoogleCodeExporter closed 8 years ago
1
calibrate accelerometers error

#584 GoogleCodeExporter closed 8 years ago
1
dataflash error: can't log

#583 GoogleCodeExporter closed 8 years ago
3
When I plug the GPS mudule I cannot arm the arducopter

#582 GoogleCodeExporter closed 8 years ago
1
Make Video Device selection (HUD overlay) stick when MP is closes and reopened

#581 GoogleCodeExporter closed 8 years ago
1
Mission Planner crashes

#580 GoogleCodeExporter closed 8 years ago
1
Replacement CODE for Optical Flow Sensor.

#579 GoogleCodeExporter closed 8 years ago
1
Mid-air disarm after unstable Auto mode

#578 GoogleCodeExporter closed 8 years ago
3
ISSUES LIST HAS BEEN MOVED!

#577 GoogleCodeExporter closed 8 years ago
1
Autoland should end by disarming

#576 GoogleCodeExporter closed 8 years ago
1
failsafe triggers during landing when in stabilize and locks out RC controll

#575 GoogleCodeExporter closed 8 years ago
2
AP_Motors_test fails to execute properly

#574 GoogleCodeExporter closed 8 years ago
1
apm 2.5 barometer and accelerometer keeps fluctuating

#573 GoogleCodeExporter closed 8 years ago
2
Loiter causing crashes

#572 GoogleCodeExporter closed 8 years ago
2
OctaV 2.9.1b missing from Missionplanner 1.2.36

#571 GoogleCodeExporter closed 8 years ago
1
Access "Waypoint option bitmask" from Mission Planner

#570 GoogleCodeExporter closed 8 years ago
1
Erratic value in magnetic declination field (not in automatic mode)

#569 GoogleCodeExporter closed 8 years ago
2
Enable Airspeed Indicator

#568 GoogleCodeExporter closed 8 years ago
1
Engine Shut-Off in the Air with RTL right after Take-Off

#567 GoogleCodeExporter closed 8 years ago
2
(enter short description of requested enhancement here)

#566 GoogleCodeExporter closed 8 years ago
1
(enter short description of requested enhancement here)

#565 GoogleCodeExporter closed 8 years ago
1
Maintain original heading

#564 GoogleCodeExporter closed 8 years ago
1
Get rid or the new arducopter level

#563 GoogleCodeExporter closed 8 years ago
1
APM 2.0 randomly boots in a very unlevel state. Rebooting without removing power fixes level.

#562 GoogleCodeExporter closed 8 years ago
1
Update Fails

#561 GoogleCodeExporter closed 8 years ago
4
BEC plug spacing on APM not wide enough

#560 GoogleCodeExporter closed 8 years ago
1
Autonomous takeoff algorithm problems Arducopter 2.9.1

#559 GoogleCodeExporter closed 8 years ago
1
CMUcam4 not supported by APM2.5?

#558 GoogleCodeExporter closed 8 years ago
1
I would like to see support for bicopters. Such as sold by Infinity Hobbies. Current works with multiwii controller

#557 GoogleCodeExporter closed 8 years ago
1
Add support for bi-copter like the avatar movie. Frame sold by

#556 GoogleCodeExporter closed 8 years ago
2