-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Bed heating is off by 10 degress causing thermal protection cutoff.
Bang mode works correctl…
-
Could someone add g-codes G131 and G132 as can repetier? ;-)
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
This is a correction to the bug report #22485 to which the incorrect config files were upload…
-
Sorry if this is not that place to make this requast. But i have an Wanhao I3 printer and i cant get the lcd to work. There is a Repetier on the machine stock. But i would like to have marlin. I have …
-
I have a lcd directly hooked up to a ramps board, and the display keeps switching between the menu and the main screen.
I am using Marlin_v1.
Tried Repetier, display works normally.
So that makes me t…
-
Hey community....
I just changed my marlin version and my Repetier-Host version to the newest.
Before, it was no Problem to print from the SD Card
but now nothing is working and i dont know why!?
S…
-
Hello,
I'm using a 12864 Full graphics display (identical to the RR-Discount one) with a RADDS 1.0 on a DUE.
It works fine on Repetier 1.0.3
With klipper on the other hand, the display out…
-
I downloaded the Development version yesterday 3-Jul in order to test the patch over the G29…
I always use Repetier-Host V1.0.6 in “ping-pong” mode where the host software waits the acknowledge before…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Hi
It is about a month I'm involved setting up bed leveling for my delta printer
It …
-
I have painstakingly extracted the pin configuration from g2Core for the Printrboard G2 and created a Marlin 2.0 pin file, I don't know what to do next. I understand its a DUE processor and is from th…