-
It is maybe rather a feature request than a bug. Probably you are aware that in aircraft communication, the published frequency number (number to dial on aircraft radio) is (can) be different from tar…
-
Hi, i should want to drive a 3 wire pc fan with this library. Wich is the better way to set pwm to the 25Khz need to smooth operations of the fan ? Thank you
-
Hy,
on which way i can cahnge the PWM Frequency to 25kHz?
I found nothing in the internet....
Thanks
-
Since upgrading to version 2.6 I can no longer decode NOAA satellites. The deviation of 25Khz is too wide and inserts a lot of noise.
-
### The problem
First channel (Light) works at 25kHz instead of 2441Hz set in config.
Mapping is also very wrong:
0-37% in HA - duty cycle nicely increases from 0% to 99%
38-47% in HA - duty …
-
https://github.com/GiorgioAresu/FanController/blob/785590adb448aaf86e80e43dbc44183c31855085/FanController.cpp#L55
I love the way you architected this class. Seriously very nice. And I was quite exc…
-
Delta BFB0712HF
When controlling the fan duty cycle from the Mainsail page, the fan seems to only respond in RPM changes when using 80-100% (corresponding to ~1500 - 5700 RPM respectively). According…
-
holding shift and clicking on the middle knob of the tuner knobs doesn't always switch between 8.33k and 25k... sometimes i have to do it a 2nd time... this happens on both COM1 and COM2...
on COM2…
-
This is most applicable to online flying using ATC networks such as VATSIM, PilotEdge, IVAO, etc.
In 25kHz frequency spacing, ATC will usually only issue a frequency change including the first 2 nu…
-
sir how can we connect the max2870 to arduino and we use 25kHz instead of 10 KHz. How can we change it ?