-
Hello all,
I am building all custom 3Dprinter, barely 500x500x500mm print volume.
Here the hardware:
SKR 1.4 turbo with BTT eprom and DCDC module
TFT35 v3.0
two (X and Y) BTT S42C
two Z axis m…
-
Can not get any response from your Programme (Marlin3DprinterTool). I am using Windows 10 connected to a Bigtreetech GTR V1.0 board with Marlin 2.0.9.1 installed. When I select the correct board rate…
-
I have just installed SKR 1.4 turbo with a TFT 35 V2.0, on my Ender 3 Pro, got everything set up correct i think, It prints great until about 65 to 99% and just stops, no message on the screen, bed an…
-
After today's update, the following compilation errors occurred。
ESP3D-TFT/main/display/3dprinter/marlin/screens/main_screen.cpp:34:10: fatal error: files_screen.h: No such file or directory
34…
-
Hey, thanks for posting the pinout, this saves me a whole bunch of work.
I developed an [STM32-based Marlin port for the Monoprice Mini Delta](https://github.com/mcheah/Marlin4MPMD) and just got a Le…
-
### Description
In the Print Menu on the TFT35 I can't select any file on any SD card.
They are all properly listed but when I tap one nothing happens.
### Steps to reproduce
1. Using mainb…
-
Hello.
How to get past both "stuck/looping" touchscreen calibration and resulting "Illegal Flash App"?
(My BIQU B1 is now unusable.)
For my device (TFT) variant installed in my BIQU B1, and…
-
### Describe the problem
I have the following setup: https://github.com/arduino/arduino-ide/pull/1132#pullrequestreview-1031068976
When I start the application I see the following errors logged:…
-
Freely discuss your opinions on an ARM platform for Grbl, moving forward after v1.1.
-
Hello,
I saw many issues like those one :
https://github.com/platformio/platform-ststm32/issues/468
https://github.com/platformio/platform-ststm32/issues/205
and I was wondering if someone kn…