-
I am interested in doing something similar--emulating a device--but rather than a powermeter I am interested in emulating an FE-C device asa bridge to a computrainer. It appears you implemented a par…
-
Is it possible to connect to a Garmin/Polar/etc computer via Bluetooth?
If not, what should be done to implement this?
Thanks
orsic updated
3 years ago
-
Hello,
I bought a seeeduino nrf52840 and wanted to try the heart rate display. I uploaded the code to the chip and installed both the libraries mentioned (ant-arduino and antplus-arduino). I believ…
-
Hi, I've read that the ant arduino only with this the NRF51/52, but this library is said to work with all architectures, so does it work with the ESP32?
-
Hi, I am trying to stream data to my watch. Already failed with ble ftms because garmin does not support that profile, now I am hoping for ant+. I need FE-C sensor lib because I have an old crosstrain…
-
Error on compiling using VSCode and PlatformIO
Cannot find file altpc.h
src\networking\httpd.c:104:24: fatal error: lwip/altcp.h: No such file or directory
Careful exploration of grblHAL folder…
-
The following frameworks appear to be the best targets for porting the library going forward
**Update** as of march 2020, platformio supports zephyr
- [X] Arduino
- [X] UART - done
- [x] ~…
-
Hi
I have here those models and ANT USB dongle to PC
Will work with them the communication ?
I mean nrf52832
-
Hi
I am trying to make an antplus sensor to send data to my garmin edge.
For this I was going to use the Seeed Xiao BLE sense board (nRF52840) together with the antplus-arduino library.
I insta…
-
Hi all,
following the known blog entries I was finally able to flash the arduino core on a nRF52840 MDK USB Dongle ([https://wiki.makerdiary.com/nrf52840-mdk-usb-dongle/](url)) using the S340 SoftDev…