-
The code within server.js that is submitting position reports to APRS-IS is producing packets of this form:
```
KB3ZOX-11>APRS,TCPIP,qAS,KB3ZOX:=3808.67N/07711.82WO/A=93121 Herons Eye Flight #04
``…
-
For adding an iGate in a remote-ish location, would it be possible to send the battery voltage as telemetry? This means that services like APRS.fi will graph the data over time, I understand it is sen…
-
I noticed that when sending up a POST request, I would always get a 422 error.
It looks like the culprit was some incorrectly named params. [I pushed up a fixed in a fork ](https://github.com/ju…
-
It would be nice if this firmware would support KISS over BLE, following the existing [specification](https://github.com/hessu/aprs-specs/blob/master/BLE-KISS-API.md). This would provide a generic int…
-
Good evening.
1. I want to thank you for your work in the development of this tracker
2. At the moment I am the only one in Ukraine who started using and developing the APRS network based on LoRa an…
-
Dear Nakhonthai,
I flashed the esp32s3 and mod the lora, the lora Init success, but when sending message, it shows [LoRa] Failed, code -24.
Please check the code as follows:
`
[1017000][D][main…
-
Per http://www.aprs-is.net/Connecting.aspx
All "packets" sent to APRS-IS must be in the TNC2 format terminated by a carriage return, line feed sequence. No line may exceed 512 bytes including the C…
-
Heads up that I've created a public syslog server which can ingest logs from an iGate. It lets the user view their own logs as well as plots data on maps - including signal strength etc. This is purel…
-
It would be great if direwold supports the M17 project.
-
### Platform
NRF52, ESP32
### Description
Would it be possible for router devices to also forward packets to APRS-IS ? Like if i have the --set-ham flag set my callsign will be reported to aprs.fi …