-
## Issue template
- Hardware and Software description: Ubuntu 20.04
Ros2 Foxy (and on another setup with Humble as well)
`rduino IDE 1.8.15
Teensyduino 1.54
- Installation type: after insta…
-
Good morning
congratulations for your work. I'm looking to make a PCB with your system. I'm not sure I understand where everything connects
for the output and accelerometer extension I put them …
-
The arduino core for esp32 updates to v3 has a lot of API changes, this library is not compatible with it.
Compilation error:
```
In file included from /home/hal/Arduino/libraries/tflm_esp32/src/…
-
Hi,
When I ran micro_ros_subscriber_twist.ino, I encountered the following error. Please advise.
In this case, 'String_sub.ino' is my file name.
```
C:\AppData\Local\Temp\arduino\sketches\B0E779…
-
Hey, Nathan,
Thank you for your Camino software.
I used it on an Arduino UNO R3 and it worked great.
I then tried Camino on the Arduino MICRO but encountered problems:
1. The test program Test…
-
#### Environment:
- Hardware description: the problem is in the micro_ros_zephyr_module installation step. No hardware used at this step yet.
- RTOS: Zephyr
- Installation type: trying to install m…
-
*- Hardware description: I'm using and Arduino Portenta H7*
*- Software: I'm running it on Arduino IDE 1.8.19, with the micro-ros Humble library (I've tried both 2.0.5 and 2.0.7)*
#### Steps to…
-
We are expecting different problems with the CubeCell using the micros() function.
To reproduce:
```
#include
uint32_t last = 0;
void setup() {
Serial.begin(115200);
delay(2000…
-
Hardware description: Jetson Orin Nx, Arduino Due
I have downloaded Arduino IDE for arm64, which supports Jetson Orin, and I've installed Micro ROS on my Jetson. However, I'm unable to complete th…
-
## Issue template
- Hardware description: esp32 dev board with microros
- Platform: Arduino
- Installation type: platformio micro ros
- Version or commit hash: humble
i think it would be gr…