-
Before I go off and buy one, does anybody know if grbl will work on the Arduino Uno Wifi with a grbl shield?.
It appears to be an uno clone with the following differences.
https://store.arduino.c…
-
Hy
Thanks a lot for your library. It works great. I will develop a ultra small sound module for my RC-boats.
The Amplifier chip I like to use needs at least a sample frequency of 32 kHz.
I like to …
-
While revisiting our old https://github.com/ThingPulse/esp8266-spotify-remote (maybe not even my `fix/bssl-memory` branch works with ESP8266 Ardunino Core 3.x) I thought that surely someone must have …
-
I have checked closed issue related with this issue.
https://github.com/ROBOTIS-GIT/OpenCR/issues/310
But I can't solve this issue with above guidline.
I am using Ardunino IDE 2.2.1, and insta…
-
I'm excited about building this project, but I happen to have a 1 meter strip of 144/m APA102 LEDs, not Neopixels. Is there a modification I can make to the code that will let me run this type of addr…
-
here is the error:
> `C:\Arduino\libraries\ssd1306\src\ssd1306_generic.c: In function 'ssd1306_fillScreen':
C:\Arduino\libraries\ssd1306\src\ssd1306_generic.c:62:5: error: 'for' loop initial dec…
-
## Introduction
A proposal to unify the test apporach to zephyr peripheral devices. By using Arduio device and Click board resources, which is off-shief support, to design our test cases.
### Pr…
-
Hi, I have an Autohelm 1000, similar to yours (Digital, without display, but a different PCB revision) laying around and am trying to get your project working on it.
I don't seem to be able to get …
-
A side project.
It would be nice to have a little microcontroller connected to a rotary encoder which outputs the same simple ASCII protocol as the FlexControl knob via serial or USB serial.
Thi…
M0LTE updated
2 years ago
-
Hi,
i tried to flash a Atmega328pb. The MCU runs at 12MHz. I used the MiniCore opiboot Botloader at 56700 Baud. The upload to the MCU in the Arduino IDE with a FTDI USB-Serial-Converter works as expe…