-
I had a broken Nano and i repaired it by replacing the MCU with an ATmega328PB I had laying around. Said MCU is not 100% compatible with the 328P, but I managed to build an hex that seems to work fine…
-
Hi There,
I made a batch of boards using Atmega328PB instead of the Atmega328P.
I have found that they work initially and then stop work working and I see the led dimly flash every second or so.
So…
-
Is it possible to use this code with new atmega328PB?
http://www.microchip.com/wwwproducts/en/ATmega328PB
-
### Description
Describe your problem.
Does not appear to have support for ATMEGA328PB.
### Steps To Reproduce Problem
Please give detailed instructions needed for anyone to attempt to…
-
Hi Jorgen!
I created an SDBox Mini 2b, but am running in a bit of trouble and maybe you can help.
First of all, I should say two things:
1. I am using the SDBox Mini on a commodore CDTV. Shou…
-
Atmega328PB is very close to Atmega328. Can you add support for other pins.
ATmega88/168/328 (Uno, Nano, Pro) Supported pins: 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, A0, A1
ATmega328PB Supported pin…
-
I got same errors as [this](https://github.com/orgua/OneWireHub/issues/60) post here with AtmelStudio 7 and ATMEGA328PB. By adding thoses flags, most errors got solved, but im still getting
> inv…
-
I am having issues with Minicore compiler to Atmega328PB (potentially affecting the rest of AVR's), the issue rises up when declaring empty strings like, `String inputString = "";`, this failure compi…
-
### Description
Im having a problem where if I read an id point, which reads fine btw, after the unit goes to sleep it wont wake up. If I short the line to wake up the unit it tries to find a point…
-
The ATmega328P microcontroller, the chip that raised the origin of Arduino (Diecemila, Duemilanove, UNO, Nano, Mini, BT, Fio, LilyPad, Pro...), also in different kits and numerous community boards, is…