-
Bed levelling inaccurate due to filament residue on the nozzle. the preparation is not the same as with the original software, i think it is better solved there so that no filament remains on the nozz…
-
Running "Set Z-offset" or "Auto Bed Leveling" on the X-Plus 3 does not save. Factory reset twice. Please tell us where in the config to store this value. I avoided this firmware for months due to this…
-
I build and flashed the current 3.0.6 firmware but there seems to be a difference with the official release.
The Auto Bed Leveling procedure of the official release (04.08.2023) includes some filam…
-
Hello. Thank you for the firmware branch. I got my BL Touch installed on my Sapphire Pro... and I got the Z-offset set. However, I am running into few issues:
Essentially, it appears the Z-offse…
-
hello! Sorry for my bad English.
I`m use AUTO_BED_LEVELING_BILINEAR function on Sapphire Pro with 3DTouch.
firmware 2.0.1
G29 is work:
SENDING:M420 V
Bilinear Leveling Grid:
0 1 …
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I'm trying to enable `PREHEAT_BEFORE_LEVELING` with `AUTO_BED_LEVELING_BILINEAR` and `PROBE_M…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I have test the latest Bugfix and the Biqu MicroProbe Version and all have the same result as…
-
(DE) Hallo knutwurst, ich habe alle Schritte genau befolgt, jedoch spinnt mein Kossel Linear Plus (keine Ultrabase, Probe Typ 1 mit -19.00 Offset ) beim Auto-Bed-Leveling (Configuration -> Delta Calib…
-
While trying to split a rear tail section of an RC airplane, I used BS hoping it would be a quick, easy solution to the previous issue, which was that the Z axis wanted to dip below the build plate to…
-
Just creating an issue to not forget this documentation task. There needs to be an additional documentation section about bed leveling, since that is a topic with many questions and confusion.
- Ho…
xblax updated
1 month ago