-
### DB Selector
DB3K
### Baseline
Uncertain
### Hypothetical
NO
### Name
AutoGyro Cavalon
### Country
Turkmenistan
### Service
Army, Border Guard
### In Commission
…
-
After our ThunderFly devcall with @kaklik and @slimonslimon we agreed on the following implementation of takeoff mode for the autogyro.
Why:
- FW takeoff (from runway) sequence is different from …
-
Na rozdíl od [Fixed Wing Landing](https://docs.px4.io/master/en/flying/fixed_wing_landing.html) máme snahu, aby dopředná rychlost v místě touchdown byla 0.
Jinými slovy kinetická a potenciální energi…
-
Současný firmware má implementované řízení pro multikoptéry a nebo klasická letadla. Vírník má určitá specifika řízení zejména v ose [pitch](https://upload.wikimedia.org/wikipedia/commons/c/c1/Yaw_A…
-
For precision evaluation of autogyro rotor model behavior a rotor visualization tool is missing.
The solution could be based on existing [YASimDevel tool](http://wiki.flightgear.org/YASim_Developmen…
-
Hello,
I am very interested in your code. Do you know about a method that could be able to run YSIMI with a rotorcraft model? I am especially interested in the [autogyro](https://github.com/ThunderF…
-
The autogyro main emergency mode is continuous autorotation flight using the main rotor. The problem emerges in the case of main rotor failure (seizure of bearing, shaft/pylon cracks, etc. ).
TF-G…
-
Can't find "/../model_checkpoints/20170512-110547" in the directory. What is it for? How to fix it?
ghost updated
6 years ago
-
Airspeed scaling is possible to turn off with parameter. In px4 docs it is not mentioned.
https://dev.px4.io/master/en/flight_stack/controller_diagrams.html#airspeed-scaling
-
**Describe the bug**
After disarm the servo actuator connected to MAIN1 output starts jittering. The intensity of this jittering varies. This state occurs only sometimes. The tested setup was CUAV Na…