-
Indoor air quality data for the BME 680 sensor.
0-500
![Image](https://github.com/meshtastic/design/assets/1795163/fdf33cd8-c83f-4eb0-8754-2b4f79237631)
![Image](https://github.com/meshtastic/desig…
-
BME tracks status, some project configurations, etc. under the hardcoded directory "${BME_PROJECT_DIR}/${BME_HIDDEN_DIR}/" (and also under "~/${BME_HIDDEN_DIR}/").
This has shown to be a problem un…
-
```use panic_halt as ;
use arduino_hal::I2c;
use bme280_rs::{Bme280, Configuration, Oversampling, SensorMode};
use fixed::types::U16F16;
use micromath::F32Ext;
use ufmt::{uDisplay, uWrite};
#[…
-
- [x] Contact Levente Dudas
- [x] Discuss connection details
- [ ] Develop data grabber application (optional)
- [ ] Test
- [ ] Download detailed flight data
- [ ] Analysis
- [ ] Lessons Learned
-
Since about six weeks ago my BME 280 has started to report 100 % humidity when it is raining.
The sensor was installed almost a year ago and did not report 100 % at anytime until about six weeks ago.…
-
I have installed your MMM-BME280 and my default device address for BME280 0X77. Checked on Adafruit site and their product also 0x77.
I can get script to run in terminal but not in MM with the 0x77 a…
-
I've been running this (my first) sensor for about a week now. It' a nettigo pre-flashed kit.
Last night it suddenly started delivering... curious values. See the [grafana](https://api-rrd.madavi.d…
-
Dear developer,
Thank you for bringing the Bayesian maximum entropy approach to the MD community. I have previously used the BME method with NMR NOE data and found good success. I am now trying to us…
-
### Board
[SparkFun qwiic BME 280](https://www.sparkfun.com/products/15440)
### Notes
[Driver](https://github.com/sparkfun/Qwiic_BME280_Py)
-
Testing the beta software there are five entries for the BME 280 sensor.
Both pressure and temperature have two lines.
Please see picture below
![image](https://user-images.githubusercontent.co…