-
Amazing work as usual!
What do you think about modifying the firmware to follow BTHome standard?
That could open interesting scenarios, like:
- device tracker;
- sleep monitoring related auto…
-
When I run the test suite on the s390x architecture one of the tests fails.
I'm guessing this bug is caused by s390x being big-endian.
I'm testing version 3.10.0 of bthome-ble.
Here's the tes…
-
### The problem
I am using Shelly BLU Motion to switch on some lights and maintain them on. However, I observe that, despite us being there moving around, the lights switch off regularly. While I do …
-
### The problem
I have a few xiaomi ble temperature sensors (LYWSD03MMC), flashed with the latestest BTHome firmware.
The temperature/ humidity is shown as expectect, but some sensors also have ga…
-
**Describe the problem you have/What new integration you would like**
[BTHome](https://bthome.io/) combined with [Bluetooth Proxy](https://esphome.io/components/bluetooth_proxy.html) works great …
-
I'd like to passively catch encrypted BtHome advertisments sent by Xiaomi sensors running `pvvx` firmware. I have the `bindkey` extracted for each.
Currently they are passed to HA via proxy, and HA…
-
**Describe the problem you have/What new integration you would like**
It would be awesome to be able to configure an ESP device with only Bluetooth, which sends sensor data using the [BTHome]…
-
### The problem
I have about 15+ shelly plus devices (gateway activated) and 4 Shelly Blue Devices,
my issue is that only one activity every 10 minutes (approx) are recognized through homeassistan…
-
Hi all!
I am building a simple water sensor that reads a water level from a touch PIN, packs the result into a BLEAdvertisement and goes into deep sleep.
However, during deep sleep the consumption…
-
Hi, thanks for your work.
I'm implementing support for BTHome in openHAB, and I've noticed the following new fields are missing
0x53 - text sensor
0x54 - raw sensor
0x55 - volume storage
In…
seime updated
2 months ago