-
Z-Endstop on Chitu V8 boards seems to remain in triggered state after pressed once and released. As such this makes it impossible to home Z properly or print. A workaround has been found by utilizing …
-
I have an Elegoo Mars 3 Pro which I have recently attempted to connected to octoprint. It is a newer ctbv4 firmware printer, so I am not expecting encrypted file support. I did however expect to be ab…
-
Hello.
I would like to have the thumbnail visible not only for prusa and klipper/octoprint, but also for ChiTu (of course, if I choose ChiTu as the firware of the printer).
You can use this phyton s…
-
Hello,
thank you for this awesome plugin!
I would appreciate, to setup your plugin as the default gcode-writer in Cura. It is a little bit inconvenient, now, to click "Save", select
the SD-Card,…
-
I don't see any version reported on the board (access is more difficult than the Mars 2, I may have missed it), but general aspect seems to confirm it's the one mentioned on Chitu shop : https://shop.…
-
After tagging all of the decoded images for identification, generated bin package created and updated on printer.
All text labels are missing.
Tested on Qidi X-Max (custom CBD/Chitu board)
-
Hi,
This is the board used by my Elegoo Mars 2 (apprently, it's the same for Elegoo Mars 2 Pro, many components in the Mars 2 are even labelled "Mars 2 Pro") : Chitu systems L 5.5 V2 series V3.1.7
…
-
### Is your feature request related to a problem? Please describe.
First time trying to compile firmware so may be doing this incorrectly - Sorry in advance
When compiling Marlin 2.1.2.1 for my …
-
I am able to flash my own customized Marlin 2.1/2.0 to my X5SA Pro using update.cbd file without any problems at all. However, after building this project, copying the update folder does not work. It'…
-
The Chitu CXY-V6-191017 actually supports an encoder for navigating the UI. The signals are present in the ribbon cable to the display as follows but they are not terminated on the display board. Note…