-
Dear,
Is there a way to add Minimum and Maximum State of Charge of the battery ?
As you know, LFP battery have the best lifetime if we use them between 20% and 80%.
Would be good to be able to …
-
But what about 240V and 60Hz?
_Originally posted by @netomx in https://github.com/CircuitSetup/Split-Single-Phase-Energy-Meter/issues/7#issuecomment-537653582_
-
### The problem
Hello,
I live in Finland with 3x230V el.power.I am using the 6-channel Energy Meter with ESPHome(dev).
My board is a vanilla 6 Channel Board 1.4V rev1. I am measuring 3 phase So…
-
Hi all,
I've bought a 6Channel Board 1.4V rev1 to monitor my home.
I'm living in Italy and here we have 220V Single Phase 50 Hz.
I'm testing it for now with only one SCT-006 on CT1 using this conne…
-
I am currently working on a PROJECT and ordered your PCB without esp32 full kit. And I am getting 65535 values for both current and voltage
-
Where can I find instructions to follow to install the software needed to configure these devices I purchased?
Attempting to follow https://github.com/CircuitSetup/Split-Single-Phase-Energy-Meter/t…
-
_**Describe the problem you have/What new integration you would like**_
ATM90e32 ESPHome platform.
I am using the ATM90E32AS based board from CircuitSetup to monitor power on 6 circuits.
[https…
-
@gemu2015
Some discussion on Discord re: 3-phase power monitoring with Tasmota. In particular, using multiple inexpensive PZEM-004T modules. I suggested that perhaps the smart meter interface you …
-
Hi CircuitSetup,
I'm really enjoying my Split Single Phase Energy meter, with only one issue - every now and then, approximately every 10 days, it disappears from the network, and requires a restar…
-
Hi
I've used the Library few months back on my esp32 and it worked perfectly without issues.
however now I'm facing some connections problem :
usually it will not connect from the first time…