-
Jacob implemented SPI on the FPGA and found issues with the SPI phase and polarity controls. Need to verify these are all correct.
-
Hello,
I would like to know the PIO clock frequency. From what I understand, in low-speed mode the PIO clock divider is set to 8, and in full-speed mode, the divider is set to 1. Given that the sys…
-
I'm using Linux kernel 6.9.9-100.fc39.x86_64, yet [socket.so_timestamping](https://github.com/pendulum-project/timestamped-socket/blob/ef24b9adccc4e9d565021e7ecbe3430c172deb97/src/socket/linux.rs#L147…
-
### Description
![Screenshot_20240808_074755_Clock](https://github.com/user-attachments/assets/0422d227-d6a5-4979-97f6-dab4453db955)
Comme ci dessus, ça serait super de pouvoir choisir un dossier …
-
With version: [v2.5.1-rc.2]
When I host Mobius in Ableton, and set Default Sync Source to "Out" in the Track Setup / Synchronization section, it does not send clock information to the port that I'v…
dig65 updated
2 weeks ago
-
Hello Dear Wolle, hello everyone!
I noticed a strange peculiarity.
After a long time in sleep mode, ESP as if loses connection with the memory card.
It is expressed in the fact that the time on th…
-
**Any XIAO SPI to any other XIAO**
Presently data is not moving between the boards.
@LynnL4
Background: The XIAO only has 10 pins most other boards have 20-40 pins. Many large projects need …
-
Hi,
Is it normal that in automatic mode the clock speeds are way above the detected demand? If I manually change the speed step on first tab even to the lowest level, the system runs normally and s…
-
I have reached endless mode, and it seems that resistor just lets some attackers pass through unaffected. It was a pretty big number too, like x2c or something, though I don't remember. Are resistors …
-
Similar to my project Lyric Fever, I can use distributed notifications to find a change in the song, get the album art and displayed a pixelated form.
or, I can fetch the most prominent color from …