-
Hi, I was able to run the addon with ardupilot but I can’t connect to another ground control station (I tried QGroundControl for now), am I doing something wrong? I tried as TCP(127.0.0.1:5760) and UD…
-
Hello,
I have multiple vehicles connected to QGC via TCP comm link, and there is a little issue with it. When I create TCP link and enter a DNS name QGC finds and save an IP address for this link. Bu…
-
Those who follow beta releases may have seen that DB 500 came with a foundation for our upcoming comms overhaul. If not, you can read my plan for these changes in [the latest changelog](https://www.ma…
-
- **hide abstract types** (and also show them exclusively) and **their inheritence links**: I heavily use abstract types so they clutter the schema with lots of arrows
- **show/hide properties** in t…
-
Phase I of the updates and strategy from the extensive work done with Hannah.
[See this document for notes, outputs and other links](https://docs.google.com/document/d/1rLBPmwE6CjknoUDaxu1SKT6D9u5H…
-
### Describe the solution you'd like
while using both CUL868 and CC2531 they switch ttyACM0 and ttyACM1 sometimes when you boot your system.
within the CUxD you can:
TTYASSIGN=ttyACM1:NC
when the…
-
Original issue at Cilph/RemoteTech2#221.
Cilph wrote:
> As I don't have any time myself I'm leaving this issue open until someone (most likely eggrobin) figures out the maths required. There's no ru…
-
I see that there is some submission guidance for new building blocks and links at https://github.com/marrink-lab/polyply_1.0/wiki/Submit-polymer-parameters and https://github.com/marrink-lab/polyply_1…
-
### Bug summary
Hello everyone. I met an error when I use the finetuned DPA2 model in the lammps MC simulation. The error informations is as below, I don't know what caused this.I'd appreciate it if …
-
The following links on developer.thunderbird.net are dead (identified by https://www.drlinkcheck.com):
- [x] https://github.com/thunderbird/developer-docs/blob/master/thunderbird-development/gettin…