-
A note form a tester at ARM:
I see that when I try to use the compass for the first time after a reboot, the device asks me to draw a circle by tilting it around, presumably for calibration.
If I dra…
-
## Summary
Add support for compass calibration using an IMU.
It is necessary to create an informative screen indicating the calibration process as well as the result. The calibration data shoul…
-
When compass calibration is disabled in a device's settings, the app thinks you are looking straight down, and the AR overlay appears as such, regardless of the direction the devices is pointed in. Al…
-
Compass is currently not calibrated, pitch and roll are both showing around -1 degrees when level. Therefore calibration is required.
-
People often claim on FB, mail or Play rating that the compass is not working correctly.
I assume in 99% of these cases the sensor is just not calibrated for the moment and needs some movement to get …
-
I will fully admit, I don't have a great way of testing the accuracy of the resulting heading at the moment. Still working on integrating the USFSMAX (MMC) into my robot where I can check against an R…
-
i have no comments.
kmaba updated
7 months ago
-
`send_calibrate_magnetometer()` and `send_calibrate_accelerometer` APIs exist for dronekit-python. But I'm unsure how I would measure the progress of the compass calibration or know that it succeeded.…
-
It appears (from coordinate-placed beacons and the virtual horizon) that there is a ca. 2° offset (points show "too low" on the camera image) on my device (Pixel 3a). Unfortunally, AR calibration curr…
-
### Prerequisites
* Device: Tuya TV02-Zigbee
```json{
"home_assistant": {
"installation_type": "Home Assistant OS",
"version": "2024.10.1",
"dev": false,
"hassio": true,
…