-
Hi,
I see that the project is stopped two years ago, neverthless I'am very interested to want to build your cablecam, but i am stuck at the start, cannot find any of the mentioned CC3D controller …
-
Hello.
First, thank you for this awesome project.
I wanted to increase fan ports in my mITX system so I built OpenFan Controller. I am using Fan Control to control fans in my system. But after conn…
-
As a large scale miner we have a variety of different control boards that has come with all of our equipment. Where it's possible to know, we would like a string that identifies each control board in …
-
Getting the following errors when I include the control surface library.
Select Teensy 4.1 as board
Try to verify any of the control surface examples.
Should code verify with out issue?
```c…
-
It is of utmost importance to manage correctly the switch from one control mode to another, to guarantee the smoothest transition, for example by properly setting new correct references to track.
-
Check spec against docs and impl unwritten funcs
-
![2024-06-02 21 41](https://github.com/RoboDurden/Hoverboard-Firmware-Hack-Gen2.x/assets/125764830/d41efa82-adf7-4225-94d8-e5968e69acfb
![2024-06-02 21 41](https://github.com/RoboDurden/Hoverboard-Fi…
-
Would it be possible to include the schematic for the control board in the repo? It's possible to reverse engineer it from the code, but a picture of it would be a lot easier (and act to document the…
-
Design a printable version of the Flight Control Board and get it printed
-
Wrong PIN definitions in Arduino/esp32 framework.
See: https://github.com/espressif/arduino-esp32/issues/9037
mp-se updated
1 month ago