-
i have the first one 12 volts and the ribbon one craftbot plus so cant with the ribbon one do i need to change to 24 volts or not
-
### GalaxySlicer Version
1.0.0beta
### OS version
Windows 10
### OS architecture
x64
### Additional system information
_No response_
### Printer
Craftbot Flow IDEX
### Ho…
-
When printing at higher speeds the Craftbot prints very ugly:
![speed](https://cloud.githubusercontent.com/assets/5834926/13285735/92d2b31e-dafc-11e5-9962-bcc7f0a22a91.jpg)
Disabling sublayers and pr…
olijf updated
8 years ago
-
Was wondering if you plan on doing an IDEX printer support (specifically some industrial printers like my Craftbot Flow Idex XL) since I switched for everything to OrcaSlicer would be a nice feature t…
-
The Craftbot firmware has some small differences causing print3d to hang. For example "M104 S200" returns ok wíth temperature which is different from Marlin. Here's (http://reprap.org/wiki/G-code#M104…
-
Craftbot Idex seems to have the ability to automatically calculate nozzle offsets. Can this be achieved in Marlin?
To the best of my knowledge, it appears each nozzle has an endstop signal wire at…
-
### Cura Version
5.3.1
### Operating System
Windows 10
### Printer
Craftbot 2 Pro
### Name abnormal settings
Extra fine, line wall count 4, Gyroid infil 30%, Tree Support, Raft 50mm/s speed, B…
-
Awesome work thus far....
I have a CB+ as well and have been debating whether to build a Voron or Ratrig or just redo this guy. I think there is a lot of potential left in these bones, but they nee…
-
### Version
2.3.0_Win64
### Operating system type + version
ALL
### 3D printer brand / version + firmware version (if known)
Prusa Mini and MK3
### Behavior
THIS IS A NEW FEATURE REQUEST.…
-
### Version
2.30
### Operating system type + version
Win10
### 3D printer brand / version + firmware version (if known)
Anycubic I3 Mega S, Craftbot Flow IDEX XL
### Behavior
At the momen…