-
-
```
newt target create dwm1001_desense
newt target set dwm1001_desense app=apps/desense
newt target set dwm1001_desense bsp=@decawave-uwb-core/hw/bsp/dwm1001
newt target set dwm1001_desense build_…
-
# Estimating transmission time of a DecaWave DW1000 UWB transceiver frame | Tom Lankhorst
I like to share with you my C implementation for estimating the DecaWave transmission time because it has bee…
-
hi evreryone,
actually i am working to my finall year project about Indoor localisation using TDOA technique with Decawave kit TREK 1000. now i will start coding so i am so confuice, how to start co…
koumc updated
12 months ago
-
At some point, baseline Zephyr [began supporting the DWM1001 board](https://docs.zephyrproject.org/latest/boards/arm/decawave_dwm1001_dev/doc/index.html). I've got Zephyr 2.3.99 setup per the [Gettin…
-
When compiling the `rtdoa_node` or the `rtdoa_tag` example, I get compile errors.
Software-Versions:
- `uwb-apps`: master
- `gcc`: 9.2.1 & 10.2.1
- `mynewt`: 1.8.0
Hardware: [DWM1001](https:/…
-
Hi,
The board design seems good, but I'm getting poor accuracy on the range readings (i.e. the distance between anchor and tag is consistently reading around 50cm higher than the true measured dist…
-
Hi!
When trying to compile the included ttk1000 bsp example I get errors about not finding the dpl libraries. Seems like the bsp example is incomplete. Has this example ever been successfully compi…
-
The `syscfg` for the `uwb-dw1000` sets the default `TX_POWER` for the device to -14.3:
https://github.com/Decawave/uwb-dw1000/blob/9503f2a394b870bd339668351afa6730da8da1c6/hw/drivers/uwb/uwb_dw1000…
-
If power is removed and re-applied within a period of 60 seconds, the TriPoint module will become unresponsive due to the Decawave chip not responding to any commands. This may be un-fixable with the…