-
After uploading this sketch to my dstike watch the NeoPixel is constant white
-
### Your Question
I would like to get all original PCB files if possible.
### Description
I want to make the original PCB myself.
-
I just got a Dstike D&B Watch and I put my own script it, but now I can't reset it. Could anyone help me with this?
-
Sorry if this questions is not for this forum, but i need to ask it.
I am a very unexperienced user of ARDUINO and I want to buy such a device, which works "from box".
I want to buy the following …
-
This is my error Error: Invalid '/Users/riley/Downloads/DSTIKE-NTP-Wristwatch-master-3/platformio.ini' (project configuration file): 'While reading from '/Users/riley/Downloads/DSTIKE-NTP-Wristwatch-m…
-
For next revision, can you add NFC components. (eg https://www.nxp.com/docs/en/nxp/data-sheets/PN532_C1.pdf)
Could then use Watchy with other NFC devices, eg https://arduinogetstarted.com/tutorials…
-
Hello, I bought I2C SSD1106 which is working with other codes but when I upload that code with configuring A_config the display behaves dumb and It refreshes every 10 seconds.
here are my circuits:…
-
Hi just flashed DSTIKE with V2 nightly build bin and for some reason the screen stopped working. I did manage to connect over serial though and when typing screen on I get the error Display not enable…
-
I tried to install the deauther 2.6.1 on few esp8266 devices. Unfortunately the buttons are not operational at all. There are two Nodemcu 8266 v1 where the display (I2C) and everything else is workin…
-
I opened an issue in a different project, but perhaps this is its right place, so I'm closing the other issue, and pasting it here. Sorry for the inconveniences.
Very nice work in deed. Thank you!
…