-
I just received my WiCan (USB) and having trouble on my BMW i3. When I use Carscanner with a BT OBD2 adaptor it connects just fine and I can get sensor data from the car.
However, when I connect Ca…
-
Hi, i tried the project and checked the code but i can't see any implementation of the bluetooth elm emulation to works with apps like torque as you mentioned in the readme.
Do you have intention …
-
Was trying to use this with mes (multiecu scan) and alfaodb both detect the dongle but it's missing some commands think it needs to be elm327 v 1.4. is the elm protocol expecting to be updated
-
Hi, how can I config a USB Elm327? Is it implemented already o can I make any changes manually?
Thanks in advance!
-
Hi Ircama, i love your project! Is it possible to run your sim with a can interface. We have a linux hw with CAN/K-Line and would love to support elm327 commands. Stephan
-
**Describe the problem you have/What new integration you would like**
ESP32 has bluetooth which can be used for requests to the car CAN bus via OBD2 adapter.
Also, such requests can be sent th…
-
Hello
I'm working on a vehicle black box system for my end-of-year project and i cant connect the esp32 to elm327
i ran the ESP32 test sketch and got the same output: "Couldn't connect to OBD sca…
-
can i get help
`Ports:
['/dev/rfcomm0']
[obd.obd] ======================= python-OBD (v0.7.1) =======================
[obd.obd] Explicit port defined
[obd.elm327] Initializing ELM327: PORT=/dev/…
-
Smallest TS packets are below7 bytes payload which become above 8 total size once CRC32 wrapping is added
it's tempting to eventually have ELM327 proxy to remove CRC32 if that would mean single CAN…
-
Hi, After sending the commands ATZ, ATE1, ATH1,ATAL, ATS0, ATSP2, ATMA Individually, the following do not return an OK.
ATAL no response,
ATMA no response.
Is there something I am doing wrong Per…