-
Hi:
For the most part, your current model works not bad for 3D printing. I…
-
Not sure where to post this, given the nature of the problem. Moreover, I didn't find an open bug report for this particular issue here. But if this is not the right place please direct me to the righ…
-
### Description of the bug
I painted a model where a bridge should be. The model is one solid object. After painting it, it is no longer treated as a bridge. It fails to print this way because it i…
-
### Version
2.2.0
### Operating system type + version
Windows 10 Professional
### 3D printer brand / version + firmware version (if known)
Any
### Requested Behavior
I'm wondering if it's…
-
Is there a reason why M117 is not implemented? Cura does put them in the generated code. So why not just accept this M-code and skip the rest of the line? Shouldn't be too difficult, right? I'd do tha…
-
And suppress alerts
-
**Application Version**
3.4.1
**Platform**
macOS
**Printer**
Prusa i3 Mk3
**Steps to Reproduce**
Create surface with embossed text (reasonably large text size helps see the problem)
…
-
### Version
_Version of Slic3r Prusa Edition used goes here_1.42.0
_Use `About->About Slic3r` for release versions_
_For -dev versions, use `git describe --tag` or get the hash value for the ve…
-
I stumbled upon this project, because I wanted to change the fan height in the dragon toolhead cowling from 7 to 10 mm and noticed, that Voron is not really open source, it is just freeware. They are …
-
In early 2018, Slic3r's 3D honeycomb infill pattern was updated to only alternate the print direction after the current layer of cells is completed, as opposed to changing direction every layer. This …