-
I can't control espa from esp3d
[image](https://user-images.githubusercontent.com/57858303/172871577-7d53e778-9c6b-4982-ab5a-450bd35017b3.png)
PTT31 updated
2 years ago
-
How to pre-lure ESP3D interface?
-
On the readmewhat means "the interface needs to be transferred to the AUX-1."
```
Compatibility with esp3d ?
Esp3d is a well known wifi project in 3d printing , too. If you are using MKS Robin …
-
Hi,
I cannot build ESP3D firmware when I tried to follow the manual.
I get this error:
esp3d \ notifications_service.cpp: 38: 10: fatal error: WiFiClientSecureAxTLS.h: No such file or directory
An…
-
https://github.com/MarlinFirmware/Marlin/commit/fecadaca82e49c2558b42684382ede121274bfea removed all configurations flags access for ESP3DLib
### In Configuration_adv.h
Latest changes prevent ES…
-
Is there any other usable UART besides TFT/AUX-1? I need to connect ESP3D and my TFT/AUX-1 is already used by TFT35.
-
I want to set up ESP3D based on ESP32-01S to send print status notifications (time to finish printing and end of printing) to telegram. tell me where it is better to install the module ESP32-01S. in t…
-
Hi,
i have flashed ESP3D to my MKS WIFI
(Firmware: https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware.git)
NANO V3 / TS35
#define MOTHERBOARD BOARD_MKS_ROBIN_NANO_V3
#define …
-
I'm really not into programming... But will it be possible to make it work with ESP3D - Firmware / ESP3D-WEBUI - GUI, used to control a 3D Printer, so it can send status and and let you change setting…
-
### Is your feature request related to a problem? Please describe.
There is MKS WiFi module with MKS Eagle and H43 display.
WiFi in Marlin firmware is configured only to work via TFT_LVGL_UI
It is …