-
Hello,
First of all, thank you for keeping this Flatcam project up to date !
I tried it recently but I got this error when I try to make a cnc job object on an excellion file :
"Couldn't bu…
-
The Dropbox and Google Drive links of FlatCam are gone, could you please provide a new one?
-
I tried with **flatcam-beta** and **flatcam-evo** but have this error:
```sh
Error: Failed changing dylib ID of /opt/homebrew/Cellar/flatcam-beta/8.9.94/libexec/lib/python3.11/site-packages/PIL/.d…
-
"It is recommended to reduce Feedrate Z to 60 (300 may be too high and could cause damage to the board). Adjust Cut Z to a value that will completely drill through the board. If using the provided fix…
-
Unfornuatly same bug like in the original version. If you try to panalize the excellon you get this error mesage:
`New object with name: Gerber_BottomLayer.GBL_panelized. 0.177734 seconds executing…
-
### Describe the bug
Running Flatcam results in error:
```
Traceback (most recent call last):
File "/nix/store/bwnyvmwfmkwrhyqch00dvhb2z59m83pb-flatcam-8.5/bin/.flatcam-wrapped", line 13, in
…
-
It might be helpful to mention either when you first introduce FlatCam or in the FlatCam tutorial that since FlatCam is always in beta, it often crashes and could require the user to restart their com…
-
Hello! I'm trying to laser burn a PCB layout prepared in FlatCAM, exported to SVG and imported into LaserGRBL (v3.7.1). While the PCB starts at 0,0 in FlatCAM (and in Inkscape if I open the SVG in it)…
-
### Description
support lasergrbl exsimple
open/close laser 1% for laser positioning.
alarm before run gcode.
lock z prevent loss focus.
-
Hello,
I haven't been able to solve a problem with cutting a board for 2 weeks. I am working on a project and I went on the road - Kicad - FlatCAM - bCNC. The problem arises at the last stage after a…