-
Sometimes the flashing process is stopping around 3-4% when flashing a binary to the GAP8 from the cfloader.
I have not investigated this deeply, but it seems as if the GAP8 is blocking for some rea…
-
Hi there I am using crazyswarm2 (https://github.com/IMRCLab/crazyswarm2) and using the wifi streamer and I found a bug, quite a detrimental effect on the streamer performance. When I run with just the…
-
It's been observed that the WiFi suffers from intermittent performance issues. This can be seen in the wifi-img-streaming example where the frame rate sometime goes down and the image stops updating f…
-
Hello community,
I'm currently working with the crazyflie 2.1 and I flashed the controller_tinympc on my crazyflie. I have a GAP8 deck connected on my crazyflie. At first I have flashed the latest …
-
make[4]: /usr/lib/gap_riscv_toolchain/bin/riscv32-unknown-elf-gcc: Command not found
mk/rules.mk:57: recipe for target '/home/gap/gap_sdk/build/gap/rt/cl/kernel/sync_mc.o' failed
make[4]: *** [/home…
-
Hello,
I'm trying to chain 2 GAP8 with JTAG to use only one JTAG programming port. But I have the following error :
```
DEPRECATED! use 'adapter speed' not 'adapter_khz'
DEPRECATED! use 'adapter…
-
Hi,
I download and build the latest gap_sdk, installed the toolchain, board is gapoc b_2.4, and build the gap8_project_v2 example.
I run the example with "make run" and this is the output:
0
GAP…
-
I try to debug the simple example of `/gap_sdk/examples/pmsis/periph/uart/uart_helloworld` using VSCode as described in the `VSCode Integration` sectoin of the manual. However, there seem to be no con…
-
Hello,
I use UBUNTU 22.04.01 LTS
I tried to install Gap8_SDK but i have an issue with openocd.
After Autotiler et license agrement i had this error
Makefile:5643: avertissement : surchargement…
-
Hello
I have a gapuino V1 and I'm using the SDK [f0a594c2a6272837e5b4aedc0aa4985952ab40ac](https://github.com/GreenWaves-Technologies/gap_sdk/commit/f0a594c2a6272837e5b4aedc0aa4985952ab40ac) commit…