-
Add an open-midi-rtc-schema spec for the Prophet 600 with Gligli mod
-
Please help, pressing "from tape" + "to tape" the "U" appears on the display but when I send the syx file from midiox nothing happens. The syx file is sending but the P600 always shows "U". I'm using…
-
Dear Fabrice, the software worked fine for a few weeks, but from one day to another some strange control panel behavior occurred: 0 changed the place to 8, means by pressing 8 the display shows 0, the…
-
Hi there,
I just bought my Prophet 600, which came with a Teensy board but the previous owner had chosen not to install it. I was told the firmware had already been uploaded on to the chip, and if …
-
Now that Curtis/OnChip has re-released the 3340, I've been able to re-populate an otherwise dead Prophet 600 (all the 3340's had been harvested out of it). I've done the resistor swaps as specified in…
ghost updated
5 years ago
-
Is is possible to add this implementation to Tweak?
> I'd also like to point out that gligli's original GTE accuracy method offered much better quality than the current implementation, even without d…
-
Hey @gligli!
I'm very interested in getting a PCB printed and sourcing the parts needed to build the clone. I was wondering if you could get me pointed in the right direction? I can update the `READM…
-
Hi everybody,
1st of all thanks a lot gligli for your work, it's a huge gift you did for the P600 lovers ;-)
I've got an issue with CC's as it seems to work or notwork depending on the position of o…
-
Hey everyone, My nice GliGli upgrade is unfortunately not going as planned... Bought a Teensy++2.0 from Tinkesphere, Prepped it as per instructions, loaded the 2.0V hex file, installed it... power on …
-
Hey everyone, My nice GliGli upgrade is unfortunately not going as planned... Bought a Teensy++2.0 from Tinkesphere, Prepped it as per instructions, loaded the 2.0V hex file, installed it... power on …