-
Hello Rob,
Question whether ubxlib has an interface to report status of the MIA M10 Gnss receiver, such as hardware status or I/O subsystem.
M10 interface Manual available here:
https://content.u…
-
# Budget DIY GPS/GNSS Base Station / Receiver and NTRIP Server Client with ESP32 and UM980
Effortlessly set up a budget DIY GPS/GNSS base station and NTRIP Server / NTRIP Client using ESP32 and the U…
-
DATAGNSS now launched the 4CH version of Pocket SDR. You can find more information here.
The news page is here: https://www.datagnss.com/blogs/news/pocketsdr-gnss-receiver-launched
![pocket-…
-
### Describe the bug
The issue appeared on version 4.5.0 but was not present on version 4.4.3. The issue is that Betaflight is receiving the GNSS UBX messages PVT, DOP, and STATUS; however, the drone…
-
* https://github.com/sparkfun/SparkFun_u-blox_GNSS_Arduino_Library/blob/main/examples/Example22_PowerOff/Example22_PowerOff.ino
* https://learn.sparkfun.com/tutorials/gnss-receiver-breakout---max-m10…
-
the problem with recording the active track persists
stops marking points and drags one line behind it. I tried to enable speed filtering, lowered the time and distance parameters in the configuratio…
-
### Describe the issue
There is no way to set the CRS of the data coming from GNSS, either internal or external.
The actual CRS of the data might any of a number of reference frames:
- WGS84(…
-
**Is your enhancement proposal related to a problem? Please describe.**
There are several aspects of the GNSS API which appear under-defined to me.
Time and location are two concepts where the dev…
-
I am got trouble with my plutoSDR device using this tool. It always shows Segmentation fault when I try to run this program to get data form my device.
Here are some information about my issues
…
-
Hey, so I am in the process of setting up RTK using ROS1 and I am a bit stuck on where to proceed.
I have successfully connected the new RTK modem to SensorCloud on a BASIC account and I believe I …